 |
 |
| SYS-2027PR-DC1TR |
- SuperServer 2027PR-DC1TR (Black)
|
| |
|
| CPU |
- Dual Socket R (LGA 2011)
- Intel® Xeon® processor E5-2600
and E5-2600 v2 family†
(up to 135W TDP *)
* Please contact your Supermicro sales representative for additional details |
| Note |
† BIOS version 3.0 or above is required |
| Cache |
|
| System Bus |
|
| |
|
| Memory Capacity |
- 16x 240-pin DDR3 DIMM slots
- Supports up to 1TB DDR3 ECC LRDIMM
- Supports up to 512GB DDR3 ECC Registered memory (RDIMM)
|
| Memory Type |
- 1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
- 32GB, 16GB, 8GB, 4GB, 2GB, 1GB
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
|
| Chipset |
|
| SAS |
- LSI 3108 SAS3 (12Gbps) controller;
RAID 0, 1, 5, 6, 10, 50 support
- Note: In order to support the Broadcom RAID Controllers, both CPU socket must be populated
|
| SATA |
- SATA w/ RAID 0, 1, 5, 10 support, maximum speed of the drive will go with port interface
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Nuvoton WPCM450 BMC
|
| Network Controllers |
- Intel® X540 Dual port 10GBase-T
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
| Graphics |
|
| |
|
| SATA |
- 2x SATA3 (6Gbps) ports
- 2x SATA2 (3Gbps) ports
|
| SAS |
|
| LAN |
- 2x RJ45 10GBase-T ports
- 1x RJ45 Dedicated IPMI LAN port
|
| USB |
- 2x USB 2.0 ports total (2x rear)
|
| VGA |
|
| Serial Port / Header |
- 1x Fast UART 16550 port / 1 Header (internal)
|
| Others |
- 1x mSATA (full size) and one SATADOM support on the daughter card
- 1x SATADOM support on the motherboard
|
|
|
|
|
| Form Factor |
|
| Model |
|
| |
|
| Width |
|
| Height |
|
| Depth |
|
| Gross Weight |
|
| Available Colors |
|
| |
|
| Buttons |
- Power On/Off button
- UID button
|
| LEDs |
- Power status LED
- HDD activity LED
- 2x Network activity LEDs
- Universal Information (UID) LED
|
| |
|
| PCI-Express |
- 1x PCI-E 3.0 (x16) Low-profile slot
- 1x PCI-E 3.0 (x8) Low-profile slot
|
| |
|
| Hot-swap |
- 12x 2.5" Hot-swap SAS/SATA HDD trays
|
| |
|
| Fans |
- 4x 8cm heavy duty PWM fans with optimal fan speed control
|
| |
|
| 1280W Redundant High-efficiency Digital Power Supplies w/ PMBus 1.2 |
| AC Input |
- 1000W Output @ 100-140V, 8-12A, 50-60Hz
- 1280W Output @ 180-240V, 6-8A, 50-60Hz
|
| DC Output |
- 1000W: +12V/83A; +5Vsb/4A
- 1280W: +12V/106.7A, +5Vsb/4A
|
| Certification |
Platinum Certified |
| |
|
| BIOS Type |
- 128Mb SPI Flash EEPROM with AMI BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- APM 1.2
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- UEFI
|
| |
|
| RoHS |
|
| Environmental Spec. |
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
