Szczegółowe informacje
3rd Gen Intel® Xeon® Scalable Processors – “Ice Lake”
GIGABYTE servers and Intel Xeon Scalable Processors deliver incredible 1P/2P performance from edge to data center with incredible gains in I/O throughput and workload demands that need high performing CPUs with large, yet optimized, memory configurations.
- Enhanced I/0: Support for PCIe 4.0 allows for double the throughput of PCIe 3.0 for fast and large data transfers. Also, 64 lanes per socket with up to 128 lanes in a 2P configuration for fast data transmission from CPU to GPU, accelerator or storage.
- CPU Performance Boost: Now up to 40 cores per socket with greatly improved IPC on Intel’s 10nm architecture while operating CPUs at 105-270W. Also, an additional UPI lane is added for up to 11.2GT/s for a low latency interconnect between CPUs.
- Next Gen Memory: Each processor provides eight memory channels to support 8 or 16 DIMM slots with up to DDR4-3200. There are two sub-clustering modes, Sub NUMA (SNC) and Hemisphere (HEMI), available using balanced memory that results in performance improvements. Additionally, support for Intel Optane PMem 200 series provides two modes for greater memory capacity and data persistence to process large amounts of data faster.
- Next Level Security: New instructions and architecture deliver a high level of cryptographic operations for data privacy and protection. Cryptographic accelerators speed up encryption protocols as well as improvements in software guard extensions and memory encryption are added.
- AI Acceleration: AI inference and training are enhanced with DL Boost Technology for greater business, operational, and security insights. Applications include HPC, AI, and Media & Graphics.
Power Efficiency
GIGABYTE servers are enabled with Automatic Fan Speed Control to achieve the best cooling and power efficiency. Individual fan speeds will be automatically adjusted according to temperature sensors strategically placed in the servers.
High Availability
SCMP is a GIGABYTE patented feature which is deployed in servers with non-fully redundant PSU design. With SCMP, in the event of faulty PSU or overheated system, the system will force the CPU into an ultra-low power mode that reduces the power load, which prevents the system from unexpected shutdown and avoids component damage or data loss.
Hardware Security
For hardware-based authentication, the passwords, encryption keys, and digital certificates are stored in a TPM module to prevent unwanted users from gaining access to your data. GIGABYTE TPM modules come in either a Serial Peripheral Interface or Low Pin Count bus.
-
| CPU |
3rd Generation Intel® Xeon® Scalable Processors
Dual processor, 10nm technology |
| Socket |
2 x LGA 4189
Socket P+ |
| TDP |
CPU TDP up to 270W |
| Memory maximum Capacity |
RDIMM modules up to 128GB supported
LRDIMM modules up to 128GB supported
3DS RDIMM/LRDIMM modules up to 256GB supported |
| Memory Slots |
32 x DIMM slots |
| Memory Type |
DDR4 memory supported only
8-channel memory architecture
1.2V modules: 3200/2933/2666 MHz |
| Rear side |
2 x 1Gb/s LAN ports (Intel® I350-AM2)
Support NCSI function
1 x 10/100/1000 management LAN |
| Video |
Integrated in Aspeed® AST2600
2D Video Graphic Adapter with PCIe bus interface
1920x1200@60Hz 32bpp, DDR4 SDRAM |
| Drive Bays |
2 x 2.5" Gen4 NVMe/SATA/SAS hot-swappable bays
8 x 2.5" SATA/SAS hot-swappable bays |
| Backplane Board |
Speed and bandwidth:
PCIe Gen4 x4 or SATA 6Gb/s or SAS 12Gb/s |
| RAID |
Intel® SATA RAID 0/1/10/5 |
-
| PCIe |
Riser Card CRS101E:
- 1 x PCIe x16 (Gen4 x16) FHHL slot, from CPU_0
Riser Card CRS101G:
- 1 x PCIe x16 (Gen4 x16) FHHL slot, from CPU_1
1 x OCP 3.0 slot with PCIe Gen4 x16 bandwidth, from CPU_0
Supports NCSI function
1 x OCP 2.0 mezzanine slot with PCIe Gen3 x8 bandwidth, from CPU_1
Supports NCSI function |
| Internal I/O |
2 x SATA 7-pin connectors
2 x CPU fan headers
1 x USB 3.0 header
1 x TPM header
1 x VROC connector
1 x Front panel header
1 x Backplane board header
1 x IPMB connector
1 x Clear CMOS jumper
1 x BIOS recovery switch |
| Front I/O |
1 x USB 3.0
1 x Power button with LED
1 x ID button with LED
1 x Reset button
1 x NMI button
2 x LAN activity LEDs
1 x HDD activity LED
1 x System status LED |
| Rear I/O |
2 x USB 3.0
1 x VGA
2 x RJ45
1 x MLAN
1 x ID button with LED |
| TPM |
1 x TPM header with SPI interface
Optional TPM2.0 kit: CTM010 |
| Certification |
80 PLUS Platinum |
| Power |
1+1 1300W 80 PLUS Platinum redundant power supplies |
| QTY |
1+1 |
| Software |
Aspeed® AST2600 management controller
GIGABYTE Management Console (AMI MegaRAC SP-X) web interface
Dashboard
HTML5 KVM
Sensor Monitor (Voltage, RPM, Temperature, CPU Status …etc.)
Sensor Reading History Data
FRU Information
SEL Log in Linear Storage / Circular Storage Policy
Hardware Inventory
Fan Profile
System Firewall
Power Consumption
Power Control
Advanced power capping
LDAP / AD / RADIUS Support
Backup & Restore Configuration
Remote BIOS/BMC/CPLD Update
Event Log Filter
User Management
Media Redirection Settings
PAM Order Settings
SSL Settings
SMTP Settings |
| System Fans |
8 x 40x40x56mm (29,700rpm) |
| Form Factor |
1U |
| Height |
43.5 mm |
| Width |
438 mm |
| Depth |
780 mm |
| Package |
985 x 588 x 250 mm |
| Weight |
23.4 kg |
| |
Name |
QTY |
Part Number |
| Motherboard |
9MR92FS1NR-00 |
|
9MR92FS1NR-00 |
| Power supply |
25EP0-213002-F3S |
|
25EP0-213002-F3S |
| Fans |
25ST2-405623-A0R |
|
25ST2-405623-A0R |
| Rail kit |
2-Section Rail kit |
|
25HB2-3A0203-K0R |
| Heatsink |
CPU Heatsink |
|
25ST1-453204-M1R |
| Backplane board |
CBP10A5: 9CBP10A5NR-00 |
|
CBP10A5: 9CBP10A5NR-00 |
| Riser card |
CRS101E: 9CRS101ENR-00 |
|
CRS101E: 9CRS101ENR-00 |
| CRS101G: 9CRS101GNR-00 |
|
CRS101G: 9CRS101GNR-00 |
