Intel D3 S4620 3.84TB SATA 6Gb/s3D TLC 2.5"7.0mm< 3DWPD - SSDSC2KG038TZ
Capacity: 3840 BUS: SATA Format: 2,5" Speed: 550 MBps (read) / 510 MBps (write) Random Read (4K): 91000 IOPS Random Entry (4K): 60000 IOPS Lifetime: 5 DWPD Technology: 3D TLC NAND
Jesteś zainteresowany zakupem większej ilości sztuk? Poproś o indywidualną ofertę B2B na ten produkt.
Kod towaru | 227.158204 |
---|---|
Part number | SSDSC2KG038TZ01 |
EAN | 735858482653 |
Alternatywa Part. No, | SSDSC2KG038TZ |
Supermicro Part No. | HDS-I2T0-SSDSC2KG038TZ |
Producent | Intel |
Dostępność |
Na stanie 0 szt.
Opcje magazynowe i dostawy
Odbiór osobisty - Praga Poniedziałek 6. 5. najpóźniej Środa 8. 5. Odbiór osobisty - Rožnov pod Radhoštěm Piątek 3. 5. najpóźniej Wtorek 7. 5. Kurier w Pradze Poniedziałek 6. 5. najpóźniej Środa 8. 5. Firma transportowa w PL Poniedziałek 6. 5. najpóźniej Środa 8. 5. Firma spedycyjna w Europie Wtorek 7. 5. najpóźniej Środa 8. 5. |
Magazyn zewnętrzny | Na stanie 29 szt. |
Gwarancja | 60 miesięcy |
Waga | 0.3 kg |
Cena zawiera wszystkie obowiązujące opłaty |
Szczegółowe informacje
Characteristics
SSDs, or disks with flash memories don't yet reach such high capacities as traditional HDDs. Their undeniable advantages are however their high read/write speed and lower latency. Their lifetimes are basically equal to those of traditional hard drives nowadays, however, it's important to choose the correct key DWPD value (no. of rewrites of the total capacity of the disk within one day).
Interface
When choosing a hard drive it's important to consider the choice of SATA, SAS, or NVMe disks. SATA and SAS disks are intended for both HDDs and SSDs and differ in their theoretical transfer speeds. NVMe disks are flash-based only and as such reach much higher read/write numbers and are also characterized by their very low latency.
Speed and Capacity
A key parameter in terms of hard drives is their RPM, which ranges between 5400 and 15000. This directly influences the speed of the drive and with that, its price. Today, more and more HDDs are being replaced by SSD solutions. SSDs are many times faster and their prices are starting to get closer to those of traditional HDDs. Their access times are also often faster and there's no wear when reading from the flash memory. The newest standard, NVMe, increases the quality of disks with flash memories even more and more hard drive manufacturers are starting to use it.
Product Specifications
Performance Specifications |
|
Sequential Bandwidth - 100% Read (up to) |
550 MB/s |
Sequential Bandwidth - 100% Write (up to) |
510 MB/s |
Random Read (100% Span) |
91000 IOPS (4K Blocks) |
Random Write (100% Span) |
60000 IOPS (4K Blocks) |
Power - Active |
3.9W |
Power - Idle |
1.3W |
Reliability |
|
Vibration - Operating |
2.17 GRMS (5 - 700 Hz) Max |
Vibration - Non-Operating |
3.13 GRMS (5 - 800 Hz) Max |
Shock (Operating and Non-Operating) |
1 | 000 G (Max) at 0.5 msec |
Operating Temperature Range |
0°C to 70°C |
Operating Temperature (Maximum) |
70 °C |
Operating Temperature (Minimum) |
0 °C |
Endurance Rating (Lifetime Writes) |
35.1 PBW |
Mean Time Between Failures (MTBF) |
2 million hours |
Uncorrectable Bit Error Rate (UBER) |
< 1 sector per 10^17 bits read |
Warranty Period |
5 yrs |
Package Specifications |
|
Form Factor |
2.5" 7mm |
Interface |
SATA 3.0 6Gb/S |
Advanced Technologies |
|
Enhanced Power Loss Data Protection |
Yes |
Hardware Encryption |
AES 256 bit |
Temperature Monitoring and Logging |
Yes |
End-to-End Data Protection |
Yes |
Parametry
Losowe czytanie | 91000 |
---|---|
Losowy wpis | 60000 |
Format płyty | 2,5" |
Pojemność w GB | 3840 |
Szybkość czytania | 550 |
Szybkość zapisu | 510 |
DWPD | 5 |
Magistrala komunikacyjna | SATA |