Szczegółowe informacje
Produkt jest End Of Life, cena ma charakter informacyjny, przygotowaliśmy dla ciebie takie alternatywy.
(Mouse over image to see Alternate View)
SAS3 IT controller Storage |
|
|
 |
| Integrated Board |
|
|
|
|
|
Key Features
1. Dual socket R3 (LGA 2011) supports
Intel® Xeon® processor E5-2600
v4†/ v3 family; QPI up to 9.6GT/s
2. Up to 2TB† ECC 3DS LRDIMM , up to
DDR4- 2400†MHz ; 16x DIMM slots
3. 1x PCI-E 3.0 x16, 6x PCI-E 3.0 x8
(3 slots occupied by IT Mode
disk controllers, Broadcom 3008)
4. Dual 10GBase-T LAN w/ Intel® X540
5. 72x 3.5" Hot-swap SAS3/SATA3 drive
bays; 2x 2.5" Hot-swap SATA drive
bays (rear)
6. SAS3 via 3x Broadcom 3008 controller;
IT mode
7. Server remote management: IPMI 2.0
/ KVM over LAN / Media over LAN
8. 7x 80mm middle cooling fans
9. 2000W High efficiency (96%)
Redundant PSU; Titanium Level
|
|
|
Due to the complexity of integration, this product is sold as a completely assembled system only (with minimum 36 HDDs).
|
|
 |
|
|
|
|
|
 |
| SSG-6048R-E1CR72L |
- SuperServer 6048R-E1CR72L (Black)
|
| |
|
Super X10DRH-iT |
| |
|
| CPU |
- Intel® Xeon® processor E5-2600 v4†/ v3 family (up to 145W TDP) *
- Dual Socket R3 (LGA 2011)
|
| Cores / Cache |
- Up to 22 Cores† / Up to 55MB† Cache
|
| System Bus |
|
| Note |
† BIOS version 2.0 or above is required |
| Note |
* Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
| |
|
| Memory Capacity |
- 16x 288-pin DDR4 DIMM slots
- Up to 2TB† ECC 3DS LRDIMM, 512 ECC RDIMM
|
| Memory Type |
- 2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
|
| DIMM Sizes |
- RDIMM: 32GB, 16GB, 8GB, 4GB
- LRDIMM: 64GB, 32GB
- 3DS LRDIMM: 128GB
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
|
| |
|
| Chipset |
|
| SAS |
- SAS3 (12Gbps) via 3x Broadcom 3008 (AOC)
- IT mode firmware
|
| SATA |
- SATA3 (6Gbps) with RAID 0, 1, 5, 10
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2400 BMC
|
| Network Controllers |
- Intel® X540 Dual Port 10GbE
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- Realtek RTL8201N PHY (dedicated IPMI)
|
| Graphics |
|
| |
|
| Serial ATA |
|
| LAN |
- 2 RJ45 10GBase-T LAN ports
- 1 RJ45 Dedicated IPMI LAN port
|
| USB |
- 2 USB 3.0 ports (rear)
- 2 USB 2.0 ports (rear)
- 1 Type A
|
| VGA |
|
| Serial Port / Header |
- 1 Fast UART 16550 port / 1 Header
|
|
|
|
|
| Form Factor |
|
| Model |
|
| |
|
| Width |
|
| Height |
|
| Depth |
|
| Weight |
- Gross Weight: 104 lbs (47.2 kg)
- Net Weight: 67 lbs (30.4 kg)
|
| Available Colors |
|
| |
|
| Buttons |
- Power On/Off button
- System Reset button
|
| LEDs |
- Power status LED
- Hard drive activity LED
- 2 Network activity LEDs
- System Overheat LED
- Power fail LED
|
| |
|
| PCI-Express |
- 1 PCI-E 3.0 x16, 3 PCI-E 3.0 x8 slots
- 3 slots occupied by IT Mode disk controller, Broadcom 3008
|
| |
|
| Hot-swap |
- 72x 3.5" Hot-swap SAS3/SATA3 drive bays with SES2
- Double-sided storage
- 2x 2.5" Hot-swap SATA drive bays (rear)
|
| Fixed |
|
| |
|
| SAS3/SATA3 single expander per backplane |
| |
|
| Fans |
- 7x 92mm hot-swap cooling fans
|
| |
| 2000W Redundant Power Supplies with PMBus |
| Total Output Power |
|
Dimension
(W x H x L) |
|
| Input |
- 1000W: 100-127 Vac / 12-9.5 A / 50-60 Hz
- 1800W: 200-220 Vac / 10-9.5 A / 50-60 Hz
- 1980W: 220-230 Vac / 10-9.8 A / 50-60 Hz
- 2000W: 230-240 Vac / 10-9.8 A / 50-60 Hz
- 2000W: 200-240 Vac / 11.8-9.8 A / 50-60 Hz (UL/cUL only)
|
| +12V |
- Max: 83.3A / Min: 0A (100-127 Vac)
- Max: 150A / Min: 0A (200-220 Vac)
- Max: 165A / Min: 0A (220-230 Vac)
- Max: 166.7A / Min: 0A (230-240 Vac)
- Max: 166.7A / Min: 0A (200-240 Vac)
(UL/cUL only)
|
| +5Vsb |
|
| Output Type |
- 27 Pairs Gold Finger Connector
|
| Certification |
  UL/cUL/CB/BSMI/CE/CCC
Titanium Level
[ Test Report ] |
| |
|
| BIOS Type |
- 128Mb SPI Flash EEPROM with AMI BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- APM 1.2
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- UEFI
|
| |
|
| RoHS |
|
| Environmental Spec. |
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
|
|
|
 |
|
|
|
|
|
|
Part Number
|
Qty
|
Description
|
| Motherboard / Chassis |
MBD-X10DRH-iT
CSE-847DTS-R2K04LPB1 |
1
1 |
Super X10DRH-iT Motherboard
4U Chassis |
| Add-on Card / Module |
AOC-S3008L-L8E-P |
3 |
|
| Backplane |
BPN-SAS3-847DR |
1 |
24-port 4U SC847D SAS2/SAS3 system rear midplane, support up to 24x 3.5-inch SAS2/SAS3/SATA3 HDD |
| Backplane |
BPN-SAS3-847DF |
1 |
48-port 4U SC847D SAS2/SAS3 system/JBOD front midplane, support up to 48x 3.5-inch SAS2/SAS3/SATA3 HDD |
| Backplane |
BPN-SAS3-847DE48D |
1 |
48-port SC847D SAS3 12Gbps front expander board (direct connection configuration, no cascade) |
| Backplane |
BPN-SAS3-847DE24D |
1 |
24-port SC847D SAS3 12Gbps rear expander board (direct connection configuration, no cascade) |
| Cable 1 |
CBL-SAST-0531 |
4 |
MINI SAS HD,12G,INT,80CM,30AWG |
| Cable 2 |
CBL-SAST-0532 |
2 |
MINI SAS HD,12G,INT,50CM,30AWG |
| Label |
LBL-0108 |
1 |
CAUTION LABEL FOR REDUNDANT PWR SYSTEMS |
| Parts |
MCP-260-00042-0N |
1 |
STD I/O shield for X9 socket R server MB with Gasket. |
| Heatsink / Retention |
SNK-P0048PS |
1 |
2U Passive CPU Heat Sink for X9, X10 Generation Systems Equipped w/ a Narrow ILM MB |
| Heatsink / Retention |
SNK-P0048AP4 |
1 |
2U Active CPU Heat Sink for Intel R2/R3/B2/B3 and AMD C32 |
| Parts |
MCP-220-84704-0N |
1 |
SC847D Rear 2.5\\\" HDD Kit |
| Power Supply |
PWS-2K04A-1R |
2 |
AC-DC 2000W, Titanium Level, Redundancy, 1U, PMBus 1.2, +12V/+5Vsb, 360x76x40mm,HF,RoHS/REACH
|
|
|
|
