Szczegółowe informacje
Produkt jest End Of Life, cena ma charakter informacyjny, przygotowaliśmy dla ciebie takie alternatywy.
Supermicro SYS-1028GQ-TXRT
or
Supermicro SYS-1028GQ-TRT
|
|
|
Integrated Board |
|
|
|
|
|
Key Features
Two systems (nodes) in a 1U form factor. Each node supports the following: 1. Dual socket R (LGA 2011) supports
Intel® Xeon® processor E5-2600
and E5-2600 v2 family† 2. Up to 512GB ECC DDR3, up to
1866MHz; 8x DIMM slots 3. Expansion slots: 1x PCI-E 3.0 x16 LP 4. I/O ports: 1 VGA, 1 COM, 2 GbE LAN,
2 USB 2.0 ports, 1 dedicated LAN for
system management, 1 InfiniBand port
with Connect-X QDR speed 5. 4x 2.5" Hot-swap SATA HDD Bays
(2x SATA3 and 2x SATA2) 6. 1280W Digital Switching Power Supply
Platinum Level (95%) |
|
|
|
|
|
|
|
|
|
SYS-1027TR-TQF |
- SuperServer 1027TR-TQF (Black)
|
|
|
Super X9DRT-IBQF |
|
|
CPU |
- Dual Socket R (LGA 2011)
- Intel® Xeon® processor E5-2600
and E5-2600 v2 family†
(up to 130W TDP)
|
Note |
† BIOS version 3.0 or above is required |
Cache |
|
System Bus |
|
|
|
Memory Capacity |
- 8x 240-pin DDR3 DIMM slots
- Up to 512GB DDR3 ECC LRDIMM
- Up to 256GB DDR3 ECC Registered memory (RDIMM)
- Up to 64GB DDR3 ECC and non-ECC UDIMM
|
Memory Type |
- 1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
|
DIMM Sizes |
- 32GB, 16GB, 8GB, 4GB, 2GB, 1GB
|
Memory Voltage |
|
Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
|
|
Chipset |
|
Infiniband |
- Mellanox ConnectX-3 QDR Infiniband 40Gbps Controller
|
SATA |
- Via Cable for SATA controller
- SATA 2.0 (3Gbps) & 3.0 (6Gbps) with RAID 0, 1, 5, 10
|
IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Nuvoton WPCM450 BMC
|
Network Controllers |
- Intel® i350 Dual Port Gigabit Ethernet
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
Graphics |
|
|
|
Serial ATA |
- 2x SATA 3.0 ports (6Gbps)
- 4x SATA 2.0 ports (3Gbps)
|
LAN |
- 2x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
USB |
- 3x USB 2.0 ports (2x rear + 1x Type A)
|
VGA |
|
Serial Port / Header |
- 1x Fast UART 16550 ports (rear/header)
|
Infiniband |
- 1x external QSFP Infiniband connector
|
|
|
|
|
Form Factor |
|
Model |
|
|
|
Width |
|
Height |
|
Depth |
|
Gross Weight |
|
Available Colors |
|
|
|
Buttons |
- Power On/Off button
- UID button
|
LEDs |
- Power status LED
- HDD activity LED
- Information LED
- 2x Network activity LEDs
- Universal Information (UID) LED
|
|
|
PCI-Express |
- 1x PCI-E 3.0 x16 Low-profile
|
|
|
Hot-swap |
- 4x 2.5" Hot-swap SATA HDD trays
|
|
|
1x 1U SAS / SATA backplane |
|
|
Fans |
- 3x 4cm counter-rotating fans w/ optimal fan speed control
|
|
1280W High-Efficiency (95%+) power supply |
AC Input |
- 1000W Output @ 100-140V, 12-8A, 50-60Hz
- 1280W Output @ 180-240V, 8-6A, 50-60Hz
|
DC Output |
- 1000W: +12V/83A; +5Vsb/4A
- 1280W: +12V/106.7A, +5Vsb/4A
|
Certification |
Platinum Certified
[ Test Report ] |
|
|
BIOS Type |
- 128Mb SPI Flash EEPROM with AMI BIOS
|
BIOS Features |
- Plug and Play (PnP)
- APM 1.2
- PCI 2.3
- ACPI 1.0 / 2.0 / 3.0 / 4.0
- USB Keyboard support
- SMBIOS 2.7.1
- UEFI
|
|
|
RoHS |
|
Environmental Spec. |
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
|
|
|
|
|
|
|
|
|
|
Part Number |
Qty |
Description |
Motherboard / Chassis |
MBD-X9DRT-IBQF
CSE-809BTQ-1K28B |
2
1 |
Super X9DRT-IBQF Motherboard
1U Chassis |
Backplane |
BPN-SAS-809TQ |
2 |
4-port 1U SC809/SC111 TQ backplane (with enclosure management), support up to 4x 2.5-inch SAS/SATA HDD |
Cable 1 |
CBL-0207L |
2 |
SATA,INT,ROUND,ST-ST,59CM,26AWG |
Cable 2 |
CBL-0157L-01 |
2 |
CBL,SGPIO,2X4F TO 2X4F,P2.54,RIBBON IN RND TUBE,60CM,28AWG |
Cable 3 |
CBL-0226L |
2 |
SATA,INT,ROUND,ST-RA,43CM,26AWG |
Cable 4 |
CBL-0227L |
2 |
SATA,INT,ROUND,ST-RA,48CM,26AWG |
Cable 5 |
CBL-0228L |
2 |
SATA,INT,ROUND,ST-RA,55CM,26AWG |
Riser Card |
RSC-R1U-E16R |
2 |
RSC-R1U-E16R |
Heatsink / Retention |
SNK-P0047PS |
2 |
1U Passive CPU Heat Sink for X9, X10 Systems Equipped w/ a Narrow ILM MB |
Heatsink / Retention |
SNK-P0047PW |
2 |
1U Passive Custom Rear CPU Heat Sink for X9, X10 1U Twin, 2U Twin^2 8-DIMM per Node Series Servers |
|
|
|
|
Produkt jest End Of Life, cena ma charakter informacyjny, przygotowaliśmy dla ciebie takie alternatywy:
Supermicro SYS-1028GQ-TXRT
nebo
Supermicro SYS-1028GQ-TRT
|
|
|
Integrated Board |
|
|
|
|
|
Key Features
Two systems (nodes) in a 1U form factor. Each node supports the following: 1. Dual socket R (LGA 2011) supports
Intel® Xeon® processor E5-2600
and E5-2600 v2 family† 2. Up to 512GB ECC DDR3, up to
1866MHz; 8x DIMM slots 3. Expansion slots: 1x PCI-E 3.0 x16 LP 4. I/O ports: 1 VGA, 1 COM, 2 GbE LAN,
2 USB 2.0 ports, 1 dedicated LAN for
system management, 1 InfiniBand port
with Connect-X QDR speed 5. 4x 2.5" Hot-swap SATA HDD Bays
(2x SATA3 and 2x SATA2) 6. 1280W Digital Switching Power Supply
Platinum Level (95%) |
|
|
|
|
|
|
|
|
|
SYS-1027TR-TQF |
- SuperServer 1027TR-TQF (Black)
|
|
|
Super X9DRT-IBQF |
|
|
CPU |
- Dual Socket R (LGA 2011)
- Intel® Xeon® processor E5-2600
and E5-2600 v2 family†
(up to 130W TDP)
|
Note |
† BIOS version 3.0 or above is required |
Cache |
|
System Bus |
|
|
|
Memory Capacity |
- 8x 240-pin DDR3 DIMM slots
- Up to 512GB DDR3 ECC LRDIMM
- Up to 256GB DDR3 ECC Registered memory (RDIMM)
- Up to 64GB DDR3 ECC and non-ECC UDIMM
|
Memory Type |
- 1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
|
DIMM Sizes |
- 32GB, 16GB, 8GB, 4GB, 2GB, 1GB
|
Memory Voltage |
|
Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
|
|
Chipset |
|
Infiniband |
- Mellanox ConnectX-3 QDR Infiniband 40Gbps Controller
|
SATA |
- Via Cable for SATA controller
- SATA 2.0 (3Gbps) & 3.0 (6Gbps) with RAID 0, 1, 5, 10
|
IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Nuvoton WPCM450 BMC
|
Network Controllers |
- Intel® i350 Dual Port Gigabit Ethernet
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
Graphics |
|
|
|
Serial ATA |
- 2x SATA 3.0 ports (6Gbps)
- 4x SATA 2.0 ports (3Gbps)
|
LAN |
- 2x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
USB |
- 3x USB 2.0 ports (2x rear + 1x Type A)
|
VGA |
|
Serial Port / Header |
- 1x Fast UART 16550 ports (rear/header)
|
Infiniband |
- 1x external QSFP Infiniband connector
|
|
|
|
|
Form Factor |
|
Model |
|
|
|
Width |
|
Height |
|
Depth |
|
Gross Weight |
|
Available Colors |
|
|
|
Buttons |
- Power On/Off button
- UID button
|
LEDs |
- Power status LED
- HDD activity LED
- Information LED
- 2x Network activity LEDs
- Universal Information (UID) LED
|
|
|
PCI-Express |
- 1x PCI-E 3.0 x16 Low-profile
|
|
|
Hot-swap |
- 4x 2.5" Hot-swap SATA HDD trays
|
|
|
1x 1U SAS / SATA backplane |
|
|
Fans |
- 3x 4cm counter-rotating fans w/ optimal fan speed control
|
| | |