|
|
|
|
|
SYS-1029UZ-TN20R25M |
- SuperServer 1029UZ-TN20R25M (Black)
|
|
|
Super X11DPU-Z+ |
|
|
CPU |
- Dual Socket P (LGA 3647)
- Intel® Xeon® Scalable Processors,
3 UPI up to 10.4GT/s
- Support CPU TDP 70-205W
|
Cores |
- Up to 28 Cores with Intel® HT Technology
|
|
|
Memory Capacity |
- 24 DIMM slots
- Up to 3TB ECC 3DS LRDIMM, 3TB ECC RDIMM, DDR4 up to 2666MHz
|
Memory Type |
- 2666/2400/2133MHz ECC DDR4 SDRAM
|
|
|
Chipset |
|
SATA |
- SATA3 (6Gbps); RAID 0, 1, 5, 10
|
Network Connectivity |
- 2 25GbE SFP28 ports via AOC-URN4-M2TS (Mellanox ConnectX-4 Lx EN)
- Download networking card drivers here
|
IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
|
Graphics |
|
|
|
NVMe |
- 8 NVMe ports + 2 SAS/SATA3/NVMe Hybrid Ports (from CPU 1)
- 10 NVMe ports (from CPU 2)
|
LAN |
- 2 25GbE SFP28 ports
- 1 RJ45 Dedicated IPMI LAN port
|
USB |
- 3 USB 3.0 ports
(2 rear, 1 Type A)
- 2 USB 2.0 ports
(front)
|
Video |
|
Serial Port |
|
DOM |
- 2 SuperDOM (Disk on Module) ports
|
|
|
BIOS Type |
|
|
|
Software |
- Intel® Node Manager
- IPMI 2.0
- KVM with dedicated LAN
- NMI
- SSM, SPM, SUM
- SuperDoctor® 5
- WatchDog
|
Power Configurations |
|
|
|
CPU |
- Monitors for CPU Cores, Chipset Voltages, Memory.
- 4+1 Phase-switching voltage regulator
|
FAN |
- Fans with tachometer monitoring
- Status monitor for speed control
- Pulse Width Modulated (PWM) fan connectors
|
Temperature |
- Monitoring for CPU and chassis environment
- Thermal Control for fan connectors
|
|
|
|
|
Form Factor |
|
Model |
|
|
|
Height |
|
Width |
|
Depth |
|
Gross Weight |
|
Available Color |
|
|
|
Buttons |
- Power On/Off button
- System UID button
|
LEDs |
- Power LED
- Hard drive activity LED
- Network activity LEDs
- UID LED
|
|
|
PCI-Express |
- 2 PCI-E 3.0 x8 slots (FH, FL)
For 20 NVMe configuration, only 1 PCI-E 3.0 x8 is available.
For 18 NVMe configuration, 2 PCI-E 3.0 x8 will be available.
(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)
|
|
|
Hot-swap |
- 20 Hot-swap 2.5" 7mm drive bays
- 20 NVMe (CPU1: 8 NVMe + 2 NVMe/SAS/SATA3 hybrid ports, CPU2: 10 NVMe ports)
|
M.2 |
- 1 M.2 NVMe (2240/2260/2280/22110)
- 1 M.2 SATA3 via optional cable CBL-SAST-0538 (2240/2260/2280/22110)
- 2 M.2 NVMe via optional add-on card AOC-SLG3-2M2 (2260/2280/22110)
|
|
|
|
Fans |
- 8 Heavy duty fans with optimal fan speed control
|
Air Shroud |
|
|
1600W Redundant Power Supplies with PMBus |
Total Output Power |
|
Dimension
(W x H x L) |
|
Input |
- 100-127Vac / 13 - 9A / 50-60Hz
- 200-240Vac / 10 - 8A / 50-60Hz
|
+12V |
- Max: 83.3A / Min: 0A (100-127Vac)
- Max: 133A / Min: 0A (200-240Vac)
|
12Vsb |
|
Output Type |
- 25 Pairs Gold Finger Connector
|
Certification |
UL/cUL/CB/BSMI/CE/CCC
Titanium Level
[ Test Report ] |
|
|
RoHS |
|
Environmental Spec. |
- Operating Temperature:
10°C ~ 35°C (50°F ~ 95°F)
- Non-operating Temperature:
-40°C to 60°C (-40°F to 140°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
|
|
|
|
|
|
|
|
|
|
Part Number
|
Qty
|
Description
|
Motherboard / Chassis |
MBD-X11DPU-Z+
CSE-116UTQ20-R1K62-T |
1
1 |
Super X11DPU-Z+ Motherboard
CSE-116UTQ20-R1K62-T |
Add-on Card / Module |
AOC-SLG3-2E4T-P |
2 |
AOC-SLG3-2E4T-P |
Add-on Card / Module |
AOC-SLG3-4E4T-P |
1 |
AOC-SLG3-4E4T-P |
Add-on Card / Module |
AOC-URN4-M2TS-P |
1 |
1U Ultra Riser 2-port 25GbE SFP28, based on Mellanox Connect |
Backplane |
BPN-NVME3-116UN |
1 |
20-port 1U (CSE116U) NVMe direct-attached backplane, support up to 20x 7mm NVMe SSDs, 2 are hybrid ports also support SAS/SATA devices |
Cable 1 |
CBL-CDAT-0674 |
1 |
4 Pin to 4 Pin I2C cable, 30cm, 26AWG, 4 wires, pinout 1-1, for vpp header(jnvi2c1),RoHS/REACH |
Cable 2 |
CBL-PWEX-1018 |
1 |
BPN PWR,2X4F/GPU-White to 2x2F,P4.2, 12V, 42CM,18AWG, 11A/pin, -25~85C |
Cable 3 |
CBL-PWEX-1019 |
1 |
BPN PWR,2X4F/GPU-White to 2x2F,P4.2, 12V, 67CM,18AWG, 11A/pin, -25~85C |
Cable 4 |
CBL-SAST-0818 |
3 |
OCuLink v. 1.0,INT,PCIe NVMe SSD, 55CM,34AWG |
Cable 5 |
CBL-SAST-0819 |
2 |
OCuLink v 1.0,INT,PCIe NVMe SSD, 65CM,34AWG,RoHS/REACH |
Cable 6 |
CBL-SAST-0820 |
2 |
OCuLink v. 1.0,INT,PCIe NVMe SSD, 85CM,34AWG,RoHS/REACH |
Cable 7 |
CBL-SAST-0847 |
8 |
OcuLink v 1.0,INT,PCIe NVMe SSD, 76CM,34AWG |
Cable 8 |
CBL-SAST-0974-1 |
5 |
OcuLink v 1.0,INT,PCIe NVMe SSD, 37CM,34AWG |
Cable 9 |
CBL-SAST-1015-1 |
1 |
MINI SAS-2 SATA (RA),6G,INT,52CM,62CM SB,30AWG,RoHS |
Air Shroud |
MCP-310-11601-0B |
1 |
Mylar air shroud for SC116U (X11 24DIMM, left side) |
Air Shroud |
MCP-310-11602-0B |
1 |
Mylar air shroud for SC116U (X11 24DIMM, right side) |
Riser Card |
RSC-UMR-8 |
1 |
1U Ultra RHS Riser Card with 1 PCIE/SATA Hybrid M.2 &1 PCIE |
Riser Card |
RSC-UN4-88 |
1 |
RSC-UN4-88 |
Heatsink / Retention |
SNK-P0067PS |
2 |
1U Passive CPU Heat Sink for X11 Purley Platform Equipped with a Narrow Retention Mechanism |
Power Supply |
PWS-1K62A-1R |
2 |
AC-DC 1600W, Titanium Level, Redundancy, 1U, DC Output: +12V and +12Vs, 203 x 73.5 x 40 mm, AC Input: 90 - 264 VAC/47-63Hz, PMBus 1.2 with DSP controller,HF,RoHS/REACH |
FAN 1 |
FAN-0101L4 |
8 |
40x56,4 Pin PWM,Primary for SC809,111, Sec.for SC816,819,808 |
Rear Window |
MCP-240-81915-0N |
1 |
Rear window for SC819U, 119U tool-less chassis (m2TS) |
|
|
|