| |
| SYS-F628R3-RC1BPT+ |
- SuperServer F628R3-RC1BPT+ (Black)
|
| |
| |
| CPU |
- Intel® Xeon® processor E5-2600 v4†/ v3 family (up to 145W TDP) *
- Dual Socket R3 (LGA 2011)
|
| Cores / Cache |
- Up to 22 Cores† / Up to 55MB† Cache
|
| System Bus |
|
| Note |
† BIOS version 2.0 or above is required |
| Note |
* Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
|
| |
| |
| Memory Capacity |
- 16x 288-pin DDR4 DIMM slots
- Up to 2TB† ECC 3DS LRDIMM, 1TB ECC RDIMM
|
| Memory Type |
- 2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
|
| DIMM Sizes |
- RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB
- LRDIMM: 64GB, 32GB
- 3DS LRDIMM: 128GB
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
|
| |
| |
| Chipset |
|
| SAS |
- SAS 3.0 (12Gbps) via Broadcom 3108
- HW RAID 0, 1, 5, 6, 10, 50, 60
|
| SATA |
- SATA 3.0 (6Gbps) w/ RAID 0, 1, 5, 10
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2400 BMC
|
| Network Controllers |
- Intel® X540 Dual Port 10GBase-T
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
| Graphics |
|
| |
| |
| SAS |
|
| LAN |
- 2 RJ45 10GBase-T LAN ports
- 1 RJ45 Dedicated IPMI LAN port
|
| USB |
|
| VGA |
|
| |
| |
| Software |
- SuperDoctor® 5
- Watch Dog
- NMI
- IPMI 2.0
- SUM and SSM
|
| Power Configurations |
- ACPI / APM Power Management
- Power-on mode for AC power recovery
|
|
 |
| |
| |
| Width |
|
| Height |
|
| Depth |
|
| Package |
- 28.3" (W) x 15.0" (H) x 42.4" (D)
|
| Weight |
- Net Weight: 105 lbs (47.63 kg)
- Gross Weight: 150 lbs (68.04 kg)
|
| Available Colors |
|
| |
| |
| Buttons |
- Power On/Off button
- UID button
|
| LEDs |
- Power status LED
- Hard drive activity LED
- 2 Network activity LEDs
- Information LED (UID, Fan failure, Overheat)
|
| |
| |
| PCI-Express |
- 1 PCI-E 3.0 x16 (LP) + 1 Micro LP
- MicroLP Adapter Matrix (Networking options)
|
| |
| |
| Hot-swap |
- (6+2) 3.5" Hot-swap SAS3 HDD trays
- 8 SAS3 or 6x SAS3 + 2 NVMe (optional)
Note: NVMe support requires 2 CPUs installed
|
| |
| |
- 1 SAS/SATA backplane
- 1 SAS/SATA/NVMe hybrid (2 slots)
|
| |
| |
| Fans |
- 2x 8cm 11k RPM middle fans
|
| |
| |
| 1280W Redundant High-efficiency Digital Power Supplies w/ PMBus 1.2 |
| AC Input |
- 1000W Output @ 100-140V, 8-12A, 50-60Hz
- 1280W Output @ 180-240V, 6-8A, 50-60Hz
|
| DC Output |
- 1000W: +12V/83A; +5Vsb/4A
- 1280W: +12V/106.7A, +5Vsb/4A
|
| Certification |
 
Platinum Certified
[ Test Report ] |
| |
| |
| BIOS Type |
- 128Mb SPI Flash EEPROM with AMI BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- APM 1.2
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- UEFI
|
| |
| |
RoHS
|
|
| Environmental Spec. |
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
